LATVIEŠU
РУССКИЙ
ENGLISH
- -10%
Technical data
s 8 mm; D 12.70 mm; NL 25.00 mm; GL 65.00 mm; Alpha 0.00 °
A cylindrical cutter for routing with templates. Thanks to the small diameter, also ideally suited to smaller inner radii.
s 8 mm; D 12.70 mm; NL 25.00 mm; GL 65.00 mm; Alpha 0.00 °
A cylindrical cutter for routing with templates. Thanks to the small diameter, also ideally suited to smaller inner radii.
Festool Edge trimming cutter HW S8 D12,7/NL25
€63.33
€57.00
Save 10%
Tax excluded
Technical data
s 8 mm; D 12.70 mm; NL 25.00 mm; GL 65.00 mm; Alpha 0.00 °
A cylindrical cutter for routing with templates. Thanks to the small diameter, also ideally suited to smaller inner radii.
s 8 mm; D 12.70 mm; NL 25.00 mm; GL 65.00 mm; Alpha 0.00 °
A cylindrical cutter for routing with templates. Thanks to the small diameter, also ideally suited to smaller inner radii.
Strenght and benefits
Edge trimming cutter with ball bearing below – this allows coatings in and on panel edges to be flush cut|Because of the small ball bearing, even inner radii of 15 mm can be flush cut
Edge trimming cutter with ball bearing below – this allows coatings in and on panel edges to be flush cut|Because of the small ball bearing, even inner radii of 15 mm can be flush cut
Strengths and benefits
- Edge trimming cutter with ball bearing below – this allows coatings in and on panel edges to be flush cut
- Because of the small ball bearing, even inner radii of 15 mm can be flush cut
Main areas of use
- Edge trimming cutter with ball bearing on the bottom makes 1:1 copying of templates possible
- Flush trimming of panel coatings
- ball bearing, lower
in self-service display pack
Warranty all-inclusive--> Find out more
491027
2 Items