LATVIEŠU
РУССКИЙ
ENGLISH
- -10%
Technical data
Dimensions length x width 254 x 420.00 mm; Min. installation height 150.00 mm; Cutting angle adjustment 0 - 47 °
The CONTURO is also suitable for working when stationary. It is simply inserted via this adapter plate in the MFT/3 multifunction table or a bench you have built yourself. Not only can you affix edging to straight edges or curves, but also oblique edges with an angle between 90° and 45° because the CONTURO can be tilted 90°–45° in the stationary unit.
Dimensions length x width 254 x 420.00 mm; Min. installation height 150.00 mm; Cutting angle adjustment 0 - 47 °
The CONTURO is also suitable for working when stationary. It is simply inserted via this adapter plate in the MFT/3 multifunction table or a bench you have built yourself. Not only can you affix edging to straight edges or curves, but also oblique edges with an angle between 90° and 45° because the CONTURO can be tilted 90°–45° in the stationary unit.
Festool Adapter plate AP-KA 65
€443.22
€398.90
Save 10%
Tax excluded
Technical data
Dimensions length x width 254 x 420.00 mm; Min. installation height 150.00 mm; Cutting angle adjustment 0 - 47 °
The CONTURO is also suitable for working when stationary. It is simply inserted via this adapter plate in the MFT/3 multifunction table or a bench you have built yourself. Not only can you affix edging to straight edges or curves, but also oblique edges with an angle between 90° and 45° because the CONTURO can be tilted 90°–45° in the stationary unit.
Dimensions length x width 254 x 420.00 mm; Min. installation height 150.00 mm; Cutting angle adjustment 0 - 47 °
The CONTURO is also suitable for working when stationary. It is simply inserted via this adapter plate in the MFT/3 multifunction table or a bench you have built yourself. Not only can you affix edging to straight edges or curves, but also oblique edges with an angle between 90° and 45° because the CONTURO can be tilted 90°–45° in the stationary unit.
Strenght and benefits
Flexible in use, the adapter plate can be built into a self-built table frame or into the MFT perforated board provided for it|Continuously adjustable angle of 0–47°|Allows the user to swivel the machine in the bench and position the workpiece horizontally during edging – for convenient and safe guidance, even with larger objects|Supplied sliding guides for guiding the workpiece safely|Perfect edging overhang when using the supplied sliding guides|Quick to install and remove the edge bander without tools|Secure fixing of the machine with slide lock|Additional roller as expansion of the pressure zone or for edging of complex shapes|Adjustable guide rail adapter for exactly parallel feeding in of the panel when edging mitres, therefore the edge doesn't run off course|Deflector that keeps the introduced edge away from the workpiece area|Start button of the machine always ideally reachable
Flexible in use, the adapter plate can be built into a self-built table frame or into the MFT perforated board provided for it|Continuously adjustable angle of 0–47°|Allows the user to swivel the machine in the bench and position the workpiece horizontally during edging – for convenient and safe guidance, even with larger objects|Supplied sliding guides for guiding the workpiece safely|Perfect edging overhang when using the supplied sliding guides|Quick to install and remove the edge bander without tools|Secure fixing of the machine with slide lock|Additional roller as expansion of the pressure zone or for edging of complex shapes|Adjustable guide rail adapter for exactly parallel feeding in of the panel when edging mitres, therefore the edge doesn't run off course|Deflector that keeps the introduced edge away from the workpiece area|Start button of the machine always ideally reachable
Swivel-mounted stationary edging.
Strengths and benefits
- Flexible in use, the adapter plate can be built into a self-built table frame or into the MFT perforated board provided for it
- Continuously adjustable angle of 0–47°
- Allows the user to swivel the machine in the bench and position the workpiece horizontally during edging – for convenient and safe guidance, even with larger objects
- Supplied sliding guides for guiding the workpiece safely
- Perfect edging overhang when using the supplied sliding guides
- Quick to install and remove the edge bander without tools
- Secure fixing of the machine with slide lock
- Additional roller as expansion of the pressure zone or for edging of complex shapes
- Adjustable guide rail adapter for exactly parallel feeding in of the panel when edging mitres, therefore the edge doesn't run off course
- Deflector that keeps the introduced edge away from the workpiece area
- Start button of the machine always ideally reachable
Main areas of use
- For small series with straight edges
- Edging of small free form elements that are difficult to clamp
- Gluing inclined edges up to 47°
- for KA 65
- for using the edge bander KA 65 as a bench-mounted machine
- adapter plate for installation in the MFT (with perforated board KA 65, order no. 500366) or a separate workbench
Delivered parts
mounting plate for edge bander complete with 15 sliding guides, additional roll, in carton
Warranty all-inclusive--> Find out more
500175
2 Items