SEMI-STATIONARY WORK

Active filters

FESTOOL Jungimo elementas VS
  • -10%
Quick view

Festool Connecting piece VS

Regular price €17.88 -10% Price €16.09
With the VS connecting piece, several MFT 3s can be connected to form a large, stable work surface. It is also used to connect the FST 660/85 or the MFT 800 to the Basis Plus system.
FESTOOL Greitos fiksacijos spaustuvas FS-HZ 160
  • -10%
Quick view

Festool Lever clamp FS-HZ 160

Regular price €67.43 -10% Price €60.69
Technical data Clamping width 160.00 mm The Festool clamps fit perfectly into the system and can be used in various ways. Whether for clamping guide rails, for clamping workpieces on the multifunction table (MFT) or the mobile workshop, for secure fastening of sections on the semi-stationary saws like the CS S50/70 or the KS/KSC 60 and for much...
FESTOOL Spaustuvai MFT-SP
  • -10%
Quick view

Festool Fixed clamps MFT-SP

Regular price €123.01 -10% Price €110.71
The MFT-SP clamping elements offer round and angular workpieces a secure hold without slipping. The fact that they are compatible with the MFT hole pattern means that it is easy to attach them to a multifunction table or the mobile workshop.
FESTOOL Sraigtiniai spaustai FSZ 120
  • -10%
Quick view

Festool Fastening clamp FSZ 120

Regular price €49.07 -10% Price €44.16
Technical data Clamping width 120.00 mm The Festool clamps fit perfectly into the system and can be used in various ways. Whether for clamping guide rails, for clamping workpieces on the multifunction table (MFT) or the mobile workshop, for secure fastening of sections on the semi-stationary saws like the CS S50/70 or the KS/KSC 60 and for much...
Festool pastūmos mechanizmas CS 50 ST
  • -10%
Quick view

Festool Sliding table ST

Regular price €397.29 -10% Price €357.56
Technical data Max. working width for trimming cuts 830.00 mm The sliding table offers the opportunity to achieve exactly right-angled cuts of workpieces with the associated preset profile setting rail of the CS 50. But other desired angles can also be set. Simply push the materials through on the saw blade – and you're done! At the same time,...
Festool leņķa lineāls AB-KS
  • -10%
Quick view

Festool Crown stop AB-KS 120

Regular price €87.97 -10% Price €79.17
The additional stop for secure placement and easy clamping of crown mouldings. Crown mouldings slipping is a thing of the past. With the crown stop, the strips are held in position and allow a perfect cut.
FESTOOL Skrūves tipa skavas FSZ 300
  • -10%
Quick view

Festool Fastening clamp FSZ 300

Regular price €60.41 -10% Price €54.37
Technical data Clamping width 300.00 mm The Festool clamps fit perfectly into the system and can be used in various ways. Whether for clamping guide rails, for clamping workpieces on the multifunction table (MFT) or the mobile workshop, for secure fastening of sections on the semi-stationary saws like the CS S50/70 or the KS/KSC 60 and for much...
Festool galda pagarināšanas elements CS 70 VL
  • -10%
Quick view

Festool Extension table CS 70 VL

Regular price €340.76 -10% Price €306.68
Technical data Dimensions length x width 525 x 522.00 mm The CS 70 VL length extension table can be attached to the rear table side of the CS 70 EB. The saw table is thus extended by 580 mm, and is ideally suited to being a steady support for long workpieces. The length extension table can be very easily installed using two adapter pieces and...
Festool bīdāms galds CS 70 ST 650
  • -10%
Quick view

Festool Sliding table CS 70 ST 650

Regular price €590.15 -10% Price €531.14
Technical data Max. working width for trimming cuts 650.00 mm The slide offers the opportunity to achieve exactly right-angled cuts of workpieces with the associated preset profile setting rail of the CS 70. But other desired angles can also be set. Simply push the materials through on the saw blade – and you're done! At the same time, the...
Festool Рычажная струбцина MFT-HZ 80
  • -10%
Quick view

Festool Lever clamp MFT-HZ 80

Regular price €49.67 -10% Price €44.70
Technical data Dimensions (L x W x H) 130 x 40.00 x 155.00 mm; Maximum height of workpiece 80.00 mm The MFT lever clamp securely holds workpieces without slipping. The fact that it is compatible with the MFT hole pattern means that it is easy to attach it to a multifunction table or the mobile workshop. The clamp lever makes it quick and...
SYS-PowerStation SYS-PST 1500 Li HP
  • -10%
Quick view

Festool SYS-PowerStation SYS-PST 1500 Li HP

Regular price €3,450.04 -10% Price €3,105.04
Technical data Cable length 2.00 m; Drive type Mains; Output voltage 230 V ~ / 50 Hz pure sine; Continuous power 3680 watt; Peak power 18000 watt; Peak power (>25 sec.) 9000 watt; Peak power (>500 sec.) 5400 watt; Nominal energy content 1555.00 Wh; Battery technology Li-Ion; Charging duration (depending on cell temperature) 3,0 h; IP protection...
Festool galda pagarināšanas elements VL TKS 80
  • -10%
Quick view

Festool Guide extension VL TKS 80

Regular price €330.71 -10% Price €297.64
The VL TKS 80 extension can be attached to the rear table side of the TKS 80. The saw table is thus extended by 580 mm, and is ideally suited to being a steady support for long workpieces. The length extension table can be very easily installed using two adapter pieces and four clamping screws, and the level can be adjusted.
Festool patrona KT-TKS 80
  • -10%
Quick view

Festool Cartridge KT-TKS 80

Regular price €137.71 -10% Price €123.94
Every year approximately 4000 people are injured on circular saws, corresponding to 16 injuries per working day. Around 26% of serious accidents in Germany even result in the injured parties receiving a disability pension (according to statistics from German Social Accident Insurance (DGUV), "Accidents at work 2017"). With the new TKS 80 table...
Festool kustīgs balsts ST TKS 80
  • -10%
Quick view

Festool Sliding table ST TKS 80

Regular price €386.07 -10% Price €347.46
The slide offers the opportunity to achieve exactly right-angled cuts of workpieces with the associated preset profile setting rail of the TKS 80. But other desired angles can also be set. Simply push the materials through on the saw blade – and you're done! At the same time, the sliding table acts as an additional extension on the left side of...
Festool garenisks balsts LA TKS 80
  • -10%
Quick view

Festool Stopper LA TKS 80

Regular price €326.25 -10% Price €293.63
The self-adjusting parallel side fence with opposing clamp ensures exact longitudinal cuts and very convenient working thanks to simple operation from the front. Fine adjustment allows it to be precisely readjusted once more.
Festool galda paplatināšanas elements VB TKS 80
  • -10%
Quick view

Festool Extension table VB TKS 80

Regular price €465.09 -10% Price €418.58
The VB TKS 80 extension is outstandingly suited to machining particularly wide workpieces – for precise results. After attaching the extension to the table, safe sawing to that width is possible.
Festool Staliaus gręžimo stovas GD 460 A
  • -10%
Quick view

Festool Drill stand for carpentry GD 460 A

Regular price €526.48 -10% Price €473.83
Technical data Max. drill depth 310.00 mm; Max. drill bit length 460.00 mm; Product weight 3.70 kg The tiltable drill stand for precise holes in wood construction up to a drilling depth of 310 mm. The holder is suitable for all drills with a collar of 43 mm or 57 mm. The centring plate enables the use of drills with diameters from 8 to 26 mm.
Back to top