Active filters

Festool skersinio pjovimo liniuotė FSK 420
  • -10%
Quick view

Festool Cross-cutting guide rail FSK 420

Regular price €212.43 -10% Price €191.19
Technical data Cutting length 420.00 mm; Angular range -60 – +60 °; Product weight 1.26 kg One click and you're done. The HK 55, HKC 55 and HK 85 Festool circular saws can easily be connected to the FSK cross-cutting guide rails, which are available in three different lengths of 250 mm, 420 mm or 670 mm. In just a few steps, this produces a...
Festool leņķa lineāls GC 1000-WA
  • -10%
Quick view

Festool Angle stop GC 1000-WA

Regular price €402.98 -10% Price €362.68
The angle stop in conjunction with the GC 1000 carpentry guide rail and the practical gauge marker makes working with the carpentry portable circular saw easier. The angle indicator increases precision and efficiency in sawing and routing work. Angles up to 90° can be set on both sides via the scale on the angle stop. Due to the 1000-mm-long...
Festool zāģēšanas ķēde SC 3/8"-91 U-39E
  • -10%
Quick view

Festool Chainsaw chain SC 3/8"-91 U-39E

Regular price €39.63 -10% Price €35.67
Technical data Tooth angle 30.00 ° Whether cutting wood or insulating materials, this chain is suitable for most applications performed using the sword saw.
Festool frēzgalva fāzīšu frēžēsanai HW S8 HW 30 ° D25-KL OFK
  • -10%
Quick view

Festool Chamfer cutter S8 HW 30° D25-KL OFK

Regular price €64.28 -10% Price €57.85
Technical data s 8 mm; D 25.00 mm; NL 11.00 mm; GL 50.00 mm; Alpha 30.00 ° The chamfer cutter can be used with or without a ball bearing. It can be used for both plastic and solid wood edges.
xFestool komplekts OSC-AH/TA/AV-Set
  • -10%
Quick view

Festool Oscillator accessories set OSC-AH/TA/AV-Set

Regular price €207.10 -10% Price €186.39
Technical data Max. plunge depth, depth stop 56.00 mm; Max. plunge depth, sliding shoe 20.00 mm; Max. plunge depth with position guide 42.00 mm; Notch scale on depth adjuster 1.50 mm; Product weight 0.64 kg The various attachments enable clean positioning and sawing on a marking. A precise plunge depth can be set with the depth stop. Together...
Festool bīdāms galds CS 70 ST
  • -10%
Quick view

Festool Sliding table CS 70 ST

Regular price €1,116.49 -10% Price €1,004.84
Technical data Max. working width for trimming cuts 920.00 mm Easy sawing of panels is possible without effort due to the extended guide unit. The slide also offers the opportunity to achieve exactly right-angled cuts of workpieces with the associated preset profile setting rail of the CS 70. But other desired angles can also be set. Simply...
Festool galda paplatināšanas elements VB
  • -10%
Quick view

Festool Extension table VB

Regular price €357.55 -10% Price €321.80
Technical data Max. working width longitudinal 610.00 mm; Dimensions length x width 664 x 438.00 mm For precise sawing work with a stop up to a cutting width of 610 mm. Easy attachment to the base table of the CS 50 VB with subsequent fine adjustment. The width extension table is usually fitted on the right.
Festool zāģripu turētājs SGA
  • -10%
Quick view

Festool Saw blade holder SGA

Regular price €58.25 -10% Price €52.43
The saw blade holder is installed on the feet of the CS 50 and can securely hold up to four saw blades. The saw blades are therefore always on hand and you always have them with you on the construction site.
Festool Panther zāģa disks 254x2,4x30 PW24
  • -20%
Quick view

Festool Saw blade HW 254x2,4x30 PW24 WOOD RIP CUT

Regular price €93.64 -20% Price €74.91
Technical data Diameter 254.00 mm; Cutting width 2.40 mm; Hole dia. 30.00 mm; No. of teeth 24; Chip angle 20.00 °; Tooth shape PW Durability and precision under the toughest conditions. Made from high-quality steel with saw teeth made from fine-grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the...
Festool universāls zāģa disks 254x2,4x30 W40
  • -20%
Quick view

Festool Saw blade HW 254x2,4x30 W40 WOOD UNIVERSAL

Regular price €144.40 -20% Price €115.52
Technical data Diameter 254.00 mm; Cutting width 2.40 mm; Hole dia. 30.00 mm; No. of teeth 40; Chip angle 15.00 °; Tooth shape W Durability and precision under the toughest conditions. Made from high-quality steel with saw teeth made from fine-grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the...
Festool speciālais zāģa disks 254x2,4x30 TF80 L
  • -20%
Quick view

Festool Saw blade HW 254x2,4x30 TF80 L LAMINATE/HPL

Regular price €207.22 -20% Price €165.78
Technical data Diameter 254.00 mm; Cutting width 2.40 mm; Hole dia. 30.00 mm; No. of teeth 80; Chip angle 4.00 °; Tooth shape TF Durability and precision under the toughest conditions. Made from high-quality steel with saw teeth made from fine-grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the...
Festool smalkzobu zāģa disks 254x2,4x30 W60
  • -20%
Quick view

Festool Saw blade HW 254x2,4x30 W60 WOOD FINE CUT

Regular price €182.10 -20% Price €145.68
Technical data Diameter 254.00 mm; Cutting width 2.40 mm; Hole dia. 30.00 mm; No. of teeth 60; Chip angle 10.00 °; Tooth shape W Durability and precision under the toughest conditions. Made from high-quality steel with saw teeth made from fine-grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the...
Festool speciālais zāģa disks 254x2,4x30 TF80 A
  • -20%
Quick view

Festool Saw blade HW 254x2,4x30 TF80 A ALUMINIUM/PLASTICS

Regular price €207.22 -20% Price €165.78
Technical data Diameter 254.00 mm; Cutting width 2.40 mm; Hole dia. 30.00 mm; No. of teeth 80; Chip angle -5.00 °; Tooth shape TF Durability and precision under the toughest conditions. Made from high-quality steel with saw teeth made from fine-grain carbide. After all, you can only achieve a perfect cut when the saw blade is as good as the...
Festool leņķa balsts FS-WA/90°
  • -10%
Quick view

Festool Angle stop FS-WA/90°

Regular price €171.34 -10% Price €154.21
90°. No more. No less. The aluminium stop milled from a single piece guarantees precise and reproducible perpendicular cuts without any readjustments. Thanks to the quick-change system, the angle stop is attached to the guide rail in an instant and, in combination with the portable circular saw, saw table and work bench, turns into the mobile...
Festool patrona KT-TKS 80
  • -10%
Quick view

Festool Cartridge KT-TKS 80

Regular price €137.71 -10% Price €123.94
Every year approximately 4000 people are injured on circular saws, corresponding to 16 injuries per working day. Around 26% of serious accidents in Germany even result in the injured parties receiving a disability pension (according to statistics from German Social Accident Insurance (DGUV), "Accidents at work 2017"). With the new TKS 80 table...
Festool galda pagarināšanas elements VL TKS 80
  • -10%
Quick view

Festool Guide extension VL TKS 80

Regular price €330.71 -10% Price €297.64
The VL TKS 80 extension can be attached to the rear table side of the TKS 80. The saw table is thus extended by 580 mm, and is ideally suited to being a steady support for long workpieces. The length extension table can be very easily installed using two adapter pieces and four clamping screws, and the level can be adjusted.
Festool galda paplatināšanas elements VB TKS 80
  • -10%
Quick view

Festool Extension table VB TKS 80

Regular price €465.09 -10% Price €418.58
The VB TKS 80 extension is outstandingly suited to machining particularly wide workpieces – for precise results. After attaching the extension to the table, safe sawing to that width is possible.
Festool garenisks balsts LA TKS 80
  • -10%
Quick view

Festool Stopper LA TKS 80

Regular price €326.25 -10% Price €293.63
The self-adjusting parallel side fence with opposing clamp ensures exact longitudinal cuts and very convenient working thanks to simple operation from the front. Fine adjustment allows it to be precisely readjusted once more.
Festool kustīgs balsts ST TKS 80
  • -10%
Quick view

Festool Sliding table ST TKS 80

Regular price €386.07 -10% Price €347.46
The slide offers the opportunity to achieve exactly right-angled cuts of workpieces with the associated preset profile setting rail of the TKS 80. But other desired angles can also be set. Simply push the materials through on the saw blade – and you're done! At the same time, the sliding table acts as an additional extension on the left side of...
Zāģripa ALUMINIUM/PLASTICS HW 160x1,8x20 F/FA52
  • -20%
Quick view

Festool Saw blade HW 160x1,8x20 F/FA52 ALUMINIUM/PLASTICS

Regular price €152.85 -20% Price €122.28
Technical data Diameter 160.00 mm; Cutting width 1.80 mm; Standard blade thickness 1.20 mm; Hole dia. 20.00 mm; No. of teeth 52; Chip angle -5.00 °; Relief angle 20.00 °; Tooth shape F/FA Durability and precision under the toughest conditions. Adapted to the application and material. Made from high quality steel with saw teeth made from fine...
Zāģripa WOOD FINE CUT HW 160x1,8x20 WD42
  • -20%
Quick view

Festool Saw blade HW 160x1,8x20 WD42 WOOD FINE CUT

Regular price €101.38 -20% Price €81.10
Technical data Diameter 160.00 mm; Cutting width 1.80 mm; Standard blade thickness 1.20 mm; Hole dia. 20.00 mm; No. of teeth 42; Chip angle 10.00 °; Relief angle 15.00 °; Tooth shape WD Durability and precision under the toughest conditions. Adapted to the application and material. Made from high quality steel with saw teeth made from fine...
Zāģripa LAMINATE/HPL HW 160x1,8x20 TF52
  • -20%
Quick view

Festool Saw blade HW 160x1,8x20 TF52 LAMINATE/HPL

Regular price €152.85 -20% Price €122.28
Technical data Diameter 160.00 mm; Cutting width 1.80 mm; Standard blade thickness 1.20 mm; Hole dia. 20.00 mm; No. of teeth 52; Chip angle -5.00 °; Relief angle 20.00 °; Tooth shape TF Durability and precision under the toughest conditions. Adapted to the application and material. Made from high quality steel with saw teeth made from fine...
Dziļuma ierobežotājs OSC-TA
  • -10%
Quick view

Festool Depth stop OSC-TA

Regular price €64.77 -10% Price €58.29
Technical data Max. plunge depth, depth stop 56.00 mm; Max. plunge depth, sliding shoe 20.00 mm; Notch scale on depth adjuster 1.50 mm; Product weight 0.20 kg With the depth stop, a precise plunge depth can be set and the saw blade can thus be protected – even before it encounters stone or concrete. Together with the circular saw blade, the...
Пильный диск WOOD RIP CUT HW 160x1,8x20 PW12 FESTOOL
  • -20%
Quick view

Festool Saw blade HW 160x1,8x20 PW12 WOOD RIP CUT

Regular price €71.17 -20% Price €56.94
Technical data Diameter 160.00 mm; Cutting width 1.80 mm; Standard blade thickness 1.20 mm; Hole dia. 20.00 mm; No. of teeth 12; Chip angle 20.00 °; Relief angle 15.00 °; Irregular tooth pitch 50.93 mm; Tooth shape PW Durability and precision under the toughest conditions. Adapted to the application and material. Made from high quality steel...
Подошва LAS-Soft-PS 420 FESTOOL
  • -10%
Quick view

Festool Base runner LAS-Soft-PS 420

Regular price €13.65 -10% Price €12.29
Insertable cleated pad specially for the PS(C) 400/420, PSB(C) 400/420 jigsaws for easy guiding and sliding of the jigsaw on rough surfaces.
Festool Алмазный пильный диск DIA 160x1,8x20 F4 ABRASIVE MATERIALS
  • -20%
Quick view

Festool Diamond circular saw blade DIA 160x1,8x20 F4 ABRASIVE MATERIALS

Regular price €191.65 -20% Price €153.32
Technical data Diameter 160.00 mm; Cutting width 1.80 mm; Standard blade thickness 1.20 mm; Hole dia. 20.00 mm; No. of teeth 4; Chip angle 10.00 °; Tooth shape F Festool's diamond saw blade saws all cement-bonded and gypsum-bonded chipboard and fibreboard quickly and with a high cutting performance. When used together with the Festool TS 55 F...
Back to top