ROUTING

ROUTING

There are 265 products.

Sort by:

Showing 1-30 of 265 item(s)

FESTOOL V raidės formos freza grioveliams HW, kotelis 8 mm HW S8 D12,5/45°

-10%

Festool Plasterboard V-groove cutter HW S8 D12,5/45°

€53.81 -10% €48.43

Technical data s 8 mm; D 12.50 mm; NL 14.00 mm; GL 55.00 mm; Alpha 45.00 ° Festool cutters are produced from first-class steel and wear-resistant carbide. This allows high stability and run-out accuracy, precise contours and a long service life. The high-strength hard solderings of the carbide blades ensure risk-free and impeccable working.

FESTOOL Suapvalinimo freza su keičiamais peiliukais HW S8 HW R2 D28 KL12,7OFK

-10%

Festool Roundover cutter with reversible blades S8 HW R2 D28 KL12,7 MFK

€149.09 -10% €134.18

Technical data s 8 mm; D 28.00 mm; NL 3.00 mm; GL 55.00 mm; R 2.00 mm Flush trimming and rounding off in a single step is possible with this cutter. Should the blades get blunt at some point, the reversible blades are turned easily – and a sharp tool is available again immediately.

FESTOOL Suapvalinimo freza su keičiamais peiliukais HW S8 HW R1 D28 KL12,7OFK

-10%

Festool Roundover cutter with reversible blades S8 HW R1 D28 KL12,7 MFK

€149.09 -10% €134.18

Technical data s 8 mm; D 28.00 mm; NL 3.00 mm; GL 55.00 mm; R 1.00 mm Flush trimming and rounding off in a single step is possible with this cutter. Should the blades get blunt at some point, the reversible blades are turned easily – and a sharp tool is available again immediately.

FESTOOL Apvalinimo freza HW, kotelis 8 mm HW S8 D31,7/R9,5 KL

-10%

Festool Roundover cutter HW S8 D31,7/R9,5 KL

€70.95 -10% €63.86

Technical data s 8 mm; R 9.50 mm; D 31.70 mm; NL 16.50 mm; GL 56.00 mm Ogee cutters are versatile in use. They are for profiling a workpiece or – with the appropriate flute cutter – for producing a counterprofile.

FESTOOL Apvalinimo freza HW, kotelis 8 mm HW S8 D16,7/R2 KL

-10%

Festool Roundover cutter HW S8 D16,7/R2 KL

€62.03 -10% €55.83

Technical data s 8 mm; R 2.00 mm; D 16.70 mm; NL 9.00 mm; GL 49.00 mm Ogee cutters are versatile in use. They are for profiling a workpiece or – with the appropriate flute cutter – for producing a counterprofile.

FESTOOL Apvalinimo freza HW HW R4-OFK 500

-10%

Festool Roundover cutter HW R4-OFK 500

€77.92 -10% €70.13

Technical data D 27.00 mm; R 4.00 mm The ogee cutter specially for the edge. It can be used for both plastic and solid wood edges. Very simple installation with a screw.

FESTOOL Apvalinimo freza HW HW R3-OFK 500

-10%

Festool Roundover cutter HW R3-OFK 500

€71.86 -10% €64.67

Technical data D 27.00 mm; R 3.00 mm The ogee cutter specially for the edge. It can be used for both plastic and solid wood edges. Very simple installation with a screw.

FESTOOL Apvalinimo freza HW HW R2-OFK 500

-10%

Festool Roundover cutter HW R2-OFK 500

€71.86 -10% €64.67

Technical data D 27.00 mm; R 2.00 mm The ogee cutter specially for the edge. It can be used for both plastic and solid wood edges. Very simple installation with a screw.

FESTOOL Spiralinė freza grioveliams HW, kotelis 8 mm HW Spi S8 D4/10

-10%

Festool Spiral groove cutter HW Spi S8 D4/10

€57.58 -10% €51.82

Technical data s 8 mm; D 4.00 mm; NL 10.00 mm; GL 45.00 mm Thanks to the solid carbide, the cutter can be used for a multitude of materials. Spiral groove cutters are outstandingly suited to creating grooves or routing cut-outs with templates.

FESTOOL Spiralinė griovelių freza HS su 8 mm koteliu HS Spi S8 D12/20

-10%

Festool Spiral groove cutter HS Spi S8 D12/20

€27.99 -10% €25.19

Technical data s 8 mm; D 12.00 mm; NL 20.00 mm; GL 52.00 mm Spiral groove cutters are outstandingly suited to creating grooves or routing cut-outs with templates. Thanks to the high-performance cutting steel, it is suitable above all for solid wood.

FESTOOL Nuožulnų freza HW HW 45°-OFK 500

-10%

Festool Chamfer cutter HW 45°-OFK 500

€64.32 -10% €57.89

Technical data D 27.00 mm; Alpha 45.00 ° The chamfer cutter can be used everywhere that a chamfer is required. Due to the very easy cutter replacement and quick depth adjustment, the chamfer is swiftly attached to the workpiece.

FESTOOL Nuožulnų freza HW HW 30°-OFK 500

-10%

Festool Chamfer cutter HW 30°-OFK 500

€64.32 -10% €57.89

Technical data D 27.00 mm; Alpha 30.00 ° The chamfer cutter can be used everywhere that a chamfer is required. Due to the very easy cutter replacement and quick depth adjustment, the chamfer is swiftly attached to the workpiece.

FESTOOL Nuožulnų freza HW HW 60°-OFK 500

-10%

Festool Chamfer cutter HW 60°-OFK 500

€64.32 -10% €57.89

Technical data D 27.00 mm; Alpha 60.00 ° The chamfer cutter can be used everywhere that a chamfer is required. Due to the very easy cutter replacement and quick depth adjustment, the chamfer is swiftly attached to the workpiece.

FESTOOL Sujungimų "kregždės uodega" freza HW, kotelis 8 mm HW S8 D20/17/15°

-10%

Festool Dovetail cutter HW S8 D20/17/15°

€50.62 -10% €45.56

Technical data s 8 mm; D 20.00 mm; NL 17.00 mm; GL 49.00 mm; Alpha 15.00 ° Dovetail cutter for producing an open dovetail joint. This joint is easy to produce in the system with the VS 600 basic device and the SZ 20 template.

FESTOOL Sujungimų "kregždės uodega" freza HS su 8 mm koteliu HS S8 D14,3/13,5/15°

-10%

Festool Dovetail cutter HS S8 D13,8/13,5/15°

€25.59 -10% €23.03

Technical data s 8 mm; D 13.80 mm; NL 13.50 mm; GL 46.00 mm; Alpha 15.00 ° Dovetail cutter for producing a semi-covered dovetail joint. This joint is easy to produce in the system with the VS 600 basic device and the SZ 14 template.

FESTOOL Freza - grąžtas HW, kotelis 8 mm HW S8 D8/19

-10%

Festool Drilling cutter HW S8 D8/19

€32.45 -10% €29.21

Technical data s 8 mm; D 8.00 mm; NL 19.00 mm; GL 65.00 mm This drilling cutter is perfectly suited to contours and cut-outs in wood or panel materials, which are subsequently covered with laminate.

FESTOOL Kiauryminė freza HW su 8 mm kotu HW S8 D5/30

-10%

Festool Through-hole drill HW S8 D5/30

€34.74 -10% €31.27

Technical data s 8 mm; D 5.00 mm; NL 30.00 mm; GL 53.50 mm Festool cutters are produced from first-class steel and wear-resistant carbide. This allows high stability and run-out accuracy, precise contours and a long service life. The high-strength hard solderings of the carbide blades ensure risk-free and impeccable working.

FESTOOL Apvalinimo freza HW S8 HW R2 D20-KL OFK

-10%

Festool Roundover cutter S8 HW R2 D20-KL OFK

€68.67 -10% €61.80

Technical data s 8 mm; D 20.00 mm; NL 2.20 mm; GL 47.00 mm; R 2.00 mm The ogee cutter can be used with or without a ball bearing. It can be used for both plastic and solid wood edges.

Festool noapaļota frēze HW HW R3 D 20 S8 OFK 700

-10%

Festool Roundover cutter S8 HW R3 D22-KL OFK

€69.92 -10% €62.93

Technical data s 8 mm; D 22.00 mm; NL 3.20 mm; GL 48.00 mm; R 3.00 mm The ogee cutter can be used with or without a ball bearing. It can be used for both plastic and solid wood edges.

FESTOOL Freza kantams HW , kotelis 8 mm HW S8 D38,5/23/30°

-10%

Festool Chamfer cutter HW S8 D38,5/23/30°

€75.06 -10% €67.55

Technical data s 8 mm; D 38.50 mm; NL 25.70 mm; GL 64.00 mm; Alpha 30.00 ° A chamfer softens an edge and protects against damage. It is also used frequently as a design element. An example of this is the Swiss profile on tables.

FESTOOL Freza kantams HW , kotelis 8 mm HW S8 D36/45°

-10%

Festool Chamfer cutter HW S8 D36/45°

€59.87 -10% €53.88

Technical data s 8 mm; D 36.00 mm; NL 11.50 mm; GL 53.00 mm; Alpha 45.00 ° A chamfer softens an edge and protects against damage. It is also used frequently as a design element. An example of this is the Swiss profile on tables.

FESTOOL Freza kantams HW , kotelis 8 mm HW S8 D25,7/25,7/15°

-10%

Festool Chamfer cutter HW S8 D25,7/25,7/15°

€64.20 -10% €57.78

Technical data s 8 mm; D 25.70 mm; NL 25.10 mm; GL 70.00 mm; Alpha 15.00 ° A chamfer softens an edge and protects against damage. It is also used frequently as a design element. An example of this is the Swiss profile on tables.

FESTOOL Freza briaunoms lyginti HW, kotelis 8 mm HW S8 D3/6

-10%

Festool Groove cutter HW S8 D3/6

€36.56 -10% €32.90

Technical data s 8 mm; D 3.00 mm; NL 6.00 mm; GL 45.00 mm Whether for fittings, a rear wall or a sliding door, grooves can be used in a versatile manner. These are quickly created with a groove cutter of a suitable diameter.

FESTOOL Freza briaunoms lyginti HW, kotelis 8 mm HW S8 D18/30

-10%

Festool Groove cutter HW S8 D18/30

€52.89 -10% €47.60

Technical data D 18.00 mm; NL 30.00 mm; GL 65.00 mm; s 8 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

FESTOOL Freza briaunoms lyginti HW, kotelis 8 mm HW S8 D13/20

-10%

Festool Groove cutter HW S8 D13/20

€41.13 -10% €37.02

Technical data s 8 mm; D 13.00 mm; NL 20.00 mm; GL 60.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

FESTOOL Freza briaunoms lyginti HW, kotelis 8 mm HW S8 D12/30

-10%

Festool Groove cutter HW S8 D12/30

€43.18 -10% €38.86

Technical data s 8 mm; D 12.00 mm; NL 30.00 mm; GL 60.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

FESTOOL Freza briaunoms lyginti HW, kotelis 8 mm HW S8 D10/30

-10%

Festool Groove cutter HW S8 D10/30

€40.79 -10% €36.71

Technical data s 8 mm; D 10.00 mm; NL 30.00 mm; GL 60.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

FESTOOL Briaunų freza su apsukama pjovimo plokštele HW su 8 mm kotu HW S8 D19/20WM Z2

-10%

Festool Edge-trimming cutter with reversible blades HW S8 D19/20WM Z2

€124.07 -10% €111.66

Technical data s 8 mm; D 19.00 mm; NL 20.00 mm; GL 64.00 mm; Alpha 0.00 ° Carbide groove cutter with replaceable reversible blades, cuts both on the head and on the side. Ideal for deep grooves. Reversible blade routing tools have fundamental advantages compared with traditional tools, especially for intensive use: No resharpening, tool always...

FESTOOL Freza kraštams lyginti HW, kotelis 12 mm HW S12 D12/40

-10%

Festool Groove cutter HW S12 D12/40

€69.70 -10% €62.73

Technical data s 12 mm; D 12.00 mm; NL 40.00 mm; GL 90.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

FESTOOL Freza kraštams lyginti HW, kotelis 12 mm HW S12 D10/35

-10%

Festool Groove cutter HW S12 D10/35

€66.83 -10% €60.15

Technical data s 12 mm; D 10.00 mm; NL 35.00 mm; GL 90.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

Showing 1-30 of 265 item(s)

1
2
3
…
9
Next