ACCESSORIES FESTOOL wireless, electric tools (40)

There are 1433 products.

Sort by:

Showing 1171-1200 of 1433 item(s)

Festool urbji mūra urbšanai DB STONE CE D5 3x

-10%

Festool Masonry drill DB STONE CE D5 3x

€37.33 -10% €33.60

Technical data Diameter 5.00 mm The long-lasting masonry drill bit with carbide blade offers the cleanest drilling results in stone and masonry. The CENTROTEC holder allows the drill bit to be quickly and easily clamped into the CENTROTEC tool chuck.

Festool smilšpapīrs STF 80X133 P40 RU2/50

-10%

Festool Abrasive sheet STF 80X133 P40 RU2/50 Rubin 2

€42.29 -10% €38.06

Technical data Dimensions 80 x 133 mm; Grit P40 The Rubin 2 is an abrasive specially for wooden materials, whether for intermediate sanding or final sanding for varnishing or for preparatory sanding work for oiling or waxing. The right abrasive for any use thanks to many different grits (P 40–220).

Festool smilšpapīrs STF 80X133 P220 RU2/50

-10%

Festool Abrasive sheet STF 80X133 P220 RU2/50 Rubin 2

€31.41 -10% €28.27

Technical data Dimensions 80 x 133 mm; Grit P220 The Rubin 2 is an abrasive specially for wooden materials, whether for intermediate sanding or final sanding for varnishing or for preparatory sanding work for oiling or waxing. The right abrasive for any use thanks to many different grits (P 40–220).

Festool smilšpapīrs STF 80X133 P180 RU2/50

-10%

Festool Abrasive sheet STF 80X133 P180 RU2/50 Rubin 2

€31.41 -10% €28.27

Technical data Dimensions 80 x 133 mm; Grit P180 The Rubin 2 is an abrasive specially for wooden materials, whether for intermediate sanding or final sanding for varnishing or for preparatory sanding work for oiling or waxing. The right abrasive for any use thanks to many different grits (P 40–220).

Festool smilšpapīrs STF 80X133 P120 RU2/50

-10%

Festool Abrasive sheet STF 80X133 P120 RU2/50 Rubin 2

€31.41 -10% €28.27

Technical data Dimensions 80 x 133 mm; Grit P120 The Rubin 2 is an abrasive specially for wooden materials, whether for intermediate sanding or final sanding for varnishing or for preparatory sanding work for oiling or waxing. The right abrasive for any use thanks to many different grits (P 40–220).

Festool frēze-urbis HW, kāts 8 mm HW S8 D30

-10%

Festool Hinge location cutter HW S8 D30

€82.53 -10% €74.28

Technical data s 8 mm; D 30.00 mm; GL 54.50 mm Hinge location cutter specially for routers, with centring point and two chamfered reamer blades. Thanks to the special blade design, the drill bits can be used on high-speed routers.

Festool frēze-urbis HW, kāts 8 mm HW D3/16

-10%

Festool Dowel drill HW D3/16

€44.95 -10% €40.46

Technical data s 8 mm; D 3.00 mm; NL 16.00 mm; GL 55.00 mm A special cutter for dowel drillings in conjunction with a router. Thanks to its geometry, it is perfectly suited to high speeds.

Festool frēze-urbis HW, kāts 8 mm HW S8 D6/30 Z

-10%

Festool Dowel drill HW S8 D6/30 Z

€31.31 -10% €28.18

Technical data s 8 mm; D 6.00 mm; NL 30.00 mm; GL 53.50 mm A special cutter for dowel drillings in conjunction with a router. Thanks to its geometry, it is perfectly suited to high speeds.

Festool frēze-urbis HW, kāts 8 mm HW S8 D10/30 Z

-10%

Festool Dowel drill HW S8 D10/30 Z

€36.13 -10% €32.52

Technical data s 8 mm; D 10.00 mm; NL 30.00 mm; GL 53.50 mm A special cutter for dowel drillings in conjunction with a router. Thanks to its geometry, it is perfectly suited to high speeds.

Festool gropju frēze HW, kāts 8 mm HW S8 R5

-10%

Festool Round nose cutter HW S8 R5

€84.09 -10% €75.68

Technical data s 8 mm; D 16.00 mm; NL 25.00 mm; GL 65.00 mm; R 5.00 mm It is possible to guide fluids into specified paths with the round nose cutter. The large effective length allows deeper water channels to also be routed in wood.

Festool frēze "bezdelīgas astes" savienojumiem HS, kāts 8 mm HS S8 D20/17/15°

-10%

Festool Dovetail cutter HS S8 D20/17/15°

€40.49 -10% €36.44

Technical data s 8 mm; D 20.00 mm; NL 17.00 mm; GL 49.00 mm; Alpha 15.00 ° Dovetail cutter for producing an open dovetail joint. This joint is easy to produce in the system with the VS 600 basic device and the SZ 20 template.

Festool HW frēze V-veida gropju veidošanai, kāts 8 mm HS S8 D14/7/90°

-10%

Festool V-groove cutter HS S8 D14/7/90°

€19.82 -10% €17.84

Technical data s 8 mm; D 14.00 mm; NL 7.00 mm; GL 50.00 mm; Alpha 90.00 ° No matter whether for complex embellishing of a workpiece or for easy routing of recesses such as grooves or notches, groove cutters with a profile are best suited to this.

FESTOOL Сменные ножи для пригоночной фрезы S8 HW D19 12x12 KL OFK

-10%

Festool Edge-trimming cutter with reversible blades S8 HW D19 12x12 KL OFK

€141.50 -10% €127.35

Technical data s 8 mm; D 19.00 mm; NL 12.00 mm; GL 52.00 mm; Alpha 0.00 ° The edge trimming cutter can be used with or without a ball bearing. It can be used for both plastic and solid wood edges.

Festool frēzgalva fāzīšu frēžēsanai HW S8 HW 30 ° D25-KL OFK

-10%

Festool Chamfer cutter S8 HW 30° D25-KL OFK

€64.28 -10% €57.85

Technical data s 8 mm; D 25.00 mm; NL 11.00 mm; GL 50.00 mm; Alpha 30.00 ° The chamfer cutter can be used with or without a ball bearing. It can be used for both plastic and solid wood edges.

Festool noapaļota frēze HW, kāts 8 mm HW S8 D25,5/R6,35 KL

-10%

Festool Roundover cutter HW S8 D25,5/R6,35 KL

€69.59 -10% €62.63

Technical data s 8 mm; R 6.35 mm; D 25.50 mm; NL 13.50 mm; GL 54.00 mm Ogee cutters are versatile in use. They are for profiling a workpiece or – with the appropriate flute cutter – for producing a counterprofile.

Festool divu izliekumu frēze HW, kāts 8 mm HW S8 D31,7/R4/R4

-10%

Festool Roman ogee cutter HW S8 D31,7/R4/R4

€75.04 -10% €67.54

Technical data s 8 mm; D 31.70 mm; NL 13.00 mm; GL 53.00 mm; R1 4.00 mm; R2 4.00 mm Festool cutters are produced from first-class steel and wear-resistant carbide. This allows high stability and run-out accuracy, precise contours and a long service life. The high-strength hard solderings of the carbide blades ensure risk-free and impeccable...

Festool gropju frēze HS, kāts 8 mm HS S8 D 4/15

-10%

Festool Groove cutter HS S8 D 4/15

€19.09 -10% €17.18

Technical data s 8 mm; D 4.00 mm; NL 15.00 mm; GL 48.00 mm If you wish to achieve perfect cutting results with ease in softwood when drilling, grooving, rebating and long-hole routing, you are best advised to use the HS groove cutter. The cutter cuts precisely, and makes drilling easier thanks to its ground base blade.

Festool spirālveida frēze gropēm HS, kāts 8 mm HS Spi S8 D8/19

-10%

Festool Spiral groove cutter HS Spi S8 D8/19

€24.05 -10% €21.65

Technical data s 8 mm; D 8.00 mm; NL 19.00 mm; GL 50.00 mm Spiral groove cutters are outstandingly suited to creating grooves or routing cut-outs with templates. Thanks to the high-performance cutting steel, it is suitable above all for solid wood.

Festool malu frēze HW, kāts 8 mm HW S8 D5/12

-10%

Festool Groove cutter HW S8 D5/12

€39.51 -10% €35.56

Technical data s 8 mm; D 5.00 mm; NL 12.00 mm; GL 45.00 mm Whether for fittings, a rear wall or a sliding door, grooves can be used in a versatile manner. These are quickly created with a groove cutter of a suitable diameter.

Festool malu frēze HW, kāts 8 mm HW S8 D9/23

-10%

Festool Groove cutter HW S8 D9/23

€36.49 -10% €32.84

Technical data s 8 mm; D 9.00 mm; NL 23.00 mm; GL 55.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

Festool malu frēze HW, kāts 8 mm HW S8 D11/20

-10%

Festool Groove cutter HW S8 D11/20

€40.49 -10% €36.44

Technical data s 8 mm; D 11.00 mm; NL 20.00 mm; GL 60.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

Festool malu frēze HW, kāts 8 mm HW S8 D12/20

-10%

Festool Groove cutter HW S8 D12/20

€41.68 -10% €37.51

Technical data s 8 mm; D 12.00 mm; NL 20.00 mm; GL 60.00 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

Festool malu frēze HW, kāts 8 mm HW S8 D18/20

-10%

Festool Groove cutter HW S8 D18/20

€55.23 -10% €49.71

Technical data D 18.00 mm; NL 20.00 mm; GL 60.00 mm; s 8 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

Festool malu frēze HW, kāts 8 mm HW S8 D24/20

-10%

Festool Groove cutter HW S8 D24/20

€64.41 -10% €57.97

Technical data D 24.00 mm; NL 20.00 mm; GL 60.00 mm; s 8 mm If you wish to achieve perfect cutting results with ease when drilling, grooving, rebating and long-hole routing, you are best advised to use the HW groove cutter. The cutter cuts precisely, makes drilling easier and has a long service life.

Festool Systainer³ organizators SYS3 ORG L 89

-10%

Festool Systainer³ Organizer SYS3 ORG L 89

€86.25 -10% €77.63

Technical data Dimensions with adjustable legs (L x W x H) 508 x 296.00 x 89.00 mm; Inner dimensions (L x W x H) 501 x 278 x 60 mm; Volume 9.70 l; Load capacity 20.00 kg; Permitted lid load 100.00 kg; Product weight 2.00 kg The new Systainer³ generation enables you to be more mobile than ever before. Festool, TANOS and bott have collaboratively...

Festool Systainer³ SYS3 L 137

-10%

Festool Systainer³ SYS3 L 137

€92.70 -10% €83.43

Technical data Dimensions with adjustable legs (L x W x H) 508 x 296.00 x 137.00 mm; Inner dimensions (L x W x H) 501 x 275 x 94 mm; Volume 13.20 l; Load capacity 20.00 kg; Load capacity (connected) 40.00 kg; Permitted lid load 100.00 kg; Product weight 1.90 kg The new Systainer³ generation enables you to be more mobile than ever before....

Festool Systainer³ SYS3 M 137

-10%

Festool Systainer³ SYS3 M 137

€76.40 -10% €68.76

Technical data Dimensions with adjustable legs (L x W x H) 396 x 296.00 x 137.00 mm; Inner dimensions (L x W x H) 389 x 275 x 96 mm; Volume 10.40 l; Load capacity 20.00 kg; Load capacity (connected) 40.00 kg; Permitted lid load 100.00 kg; Product weight 1.50 kg The new Systainer³ generation enables you to be more mobile than ever before....

Festool gropju frēze ar maināmiem asmeņiem HW, kāts 8 mm HW D16/30 S8

-10%

Festool Groove cutter with reversible blades HW D16/30 S8

€141.50 -10% €127.35

Technical data s 8 mm; D 16.00 mm; NL 30.00 mm; GL 70.00 mm Carbide groove cutter with replaceable reversible blades, cuts both on the head and on the side. Ideal for deep grooves. Reversible blade routing tools have fundamental advantages compared with traditional tools, especially for intensive use: No resharpening, tool always ready to use...

Festool maināmi asmenīši HW-WP R1 D28 KL12,7OFK

-10%

Festool Replacement cutters HW-WP R1 D28 KL12,7 OFK

€91.35 -10% €82.22

Technical data Diameter 28.00 mm; Ball bearing 12.70 mm; R 1.00 mm Highly precise carbide reversible blades. A sharp tool is always available thanks to four blades. No resharpening is therefore necessary, and a constant cutter diameter is guaranteed.

Festool maināmi asmenīši HW-WP R1,5 D28 KL12,7OF

-10%

Festool Replacement cutters HW-WP R1,5 D28 KL12,7 OFK

€91.35 -10% €82.22

Technical data Diameter 28.00 mm; Ball bearing 12.70 mm; R 1.50 mm Highly precise carbide reversible blades. A sharp tool is always available thanks to four blades. No resharpening is therefore necessary, and a constant cutter diameter is guaranteed.

Showing 1171-1200 of 1433 item(s)

Previous
1
…
39
40
41
…
48
Next