Active filters

  • Availability: In stock
Festool dimanta disks DIA HARD-D150
  • -20%
Quick view

Festool Diamond disc DIA HARD-D150

Regular price €476.82 -20% Price €381.46
Technical data Segment height 11 mm; Active surface 3660 mm²; Diameter 150.00 mm The DIA HARD replacement disc with a diameter of 150 mm and a diamond segment height of 11 mm achieves the best results for hard substrates. The replacement disc is easy to attach to the tool head of the RG 150. Thanks to the use of high-quality materials and the...
Festool frēze "bezdelīgas astes" savienojumiem HS, kāts 8 mm HW S8 D13,8/13,5/15°
  • -10%
Quick view

Festool Dovetail cutter HW S8 D13,8/13,5/15°

Regular price €47.24 -10% Price €42.52
Technical data s 8 mm; D 13.80 mm; NL 13.50 mm; GL 46.00 mm; Alpha 15.00 ° Dovetail cutter for producing a semi-covered dovetail joint. This joint is easy to produce in the system with the VS 600 basic device and the SZ 14 template.
Festool miksera kāts, spirālveidīgs HS 3 120x600 L M14
  • -10%
Quick view

Festool Spiral stirrer HS 3 120x600 L M14

Regular price €45.43 -10% Price €40.89
Technical data Material quantity 10 – 25 kg; Diameter 120.00 mm; Length 600.00 mm Stirring rod spiralled to the left with three spirals for very fluid materials. With mixing, as the material is pushed from top to bottom and flows back up at the sides. Possible lumps are broken up without spraying due to the high strength of the drive and the...
Festool miksera kāts, spirālveidīgs HS 3 120x600 R M14
  • -10%
Quick view

Festool Spiral stirrer HS 3 120x600 R M14

Regular price €45.43 -10% Price €40.89
Technical data Material quantity 10 – 25 kg; Diameter 120.00 mm; Length 600.00 mm Stirring rod spiralled to the right with three spirals for stiff materials with an M14 internal thread. Take the heavy mass from the bottom to the top. The material is conveyed from the bottom of the tub up through the centre of the stirrer, and flows back down...
Festool skrūvēšanas uzgaļu kasete TX 10-50/BH-SORT/31x
  • -10%
Quick view

Festool Bit cassette TX 10-50/BH-SORT/31x

Regular price €42.54 -10% Price €38.29
Technical data Length 25 mm The bit range in a practical SYS case. The bit case contains 30 high-quality bits and a magnetic CENTROTEC bit holder for general screwdriving work, cleanly stowed and quickly at hand.
Festool skrūves DWS C FT 3,9x25 1000x
  • -10%
Quick view

Festool Drywall screws DWS C FT 3,9x25 1000x

Regular price €41.44 -10% Price €37.30
Technical data Diameter 3.90 mm; Length 25.00 mm The drywall screws loaded in a magazine are suitable for time-saving screwing of plasterboard panels with magazine drywall screwdrivers, for example. The phosphated screws are protected against corrosion and can be skimmed.
Festool dziļuma ierobežotājs DC UNI FF
  • -10%
Quick view

Festool Depth stop DC UNI FF

Regular price €145.85 -10% Price €131.27
Technical data Max. screw size for softwood 6 x 100 mm; Holder FastFix The depth stop can be used with all drills and impact drills with a FastFix interface. Large-scale screwdriving applications with a uniform screwdriving depth are accomplished very easily and without complications with the adjustable depth stop with integrated claw coupling....
Festool birstes vainags BC-DCG AG 125
  • -10%
Quick view

Festool Brush ring BC-DCG AG 125

Regular price €25.14 -10% Price €22.63
The brush set for retrofitting. The brushes are flush with the substrate and thus ensure improved extraction when working with the DCG-AGP 125.
Festool leņķa piederums AU-43 FFP
  • -10%
Quick view

Festool Angle attachment AU-43 FFP

Regular price €208.79 -10% Price €187.91
Technical data Max. screw size for softwood 10 x 300 mm; Holder FastFix; Collar dia. 43.00 mm The angle attachment enables demanding drilling and screwdriving applications in narrow spaces. The robust design allows the processing of all screwdriving and drilling diameters suitable for the drill, and also creates maximum torques. The angle...
Festool spec. savienojums AD-EF-M14/80 ERGOFIX
  • -10%
Quick view

Festool Adapter AD-EF-M14/80 ErgoFix

Regular price €19.45 -10% Price €17.51
Technical data Stroke length 80.00 mm Adapter for stirring rod holder (M14) with an internal thread for use on MX stirrers. ErgoFix adapter for individual adjustment of the height so as to be able to work upright – for smaller and larger users.
Festool instrumenta galviņa DIA THERMO-RG 150
  • -20%
Quick view

Festool Machine/tool head DIA THERMO-RG 150

Regular price €751.70 -20% Price €601.36
Technical data Segment height 3 mm; Diameter 150.00 mm The DIA Thermo RG 150 tool head is particularly well suited to materials that are difficult to sand off, which smear due to heat. Due to the arrangement of the diamonds, the material is scraped rather than sanded, and the disc consequently cannot get clogged – very fast removal can be...
Festool instrumenta galviņa DIA HARD-RG 150
  • -20%
Quick view

Festool Machine/tool head DIA HARD-RG 150

Regular price €592.08 -20% Price €473.66
Technical data Segment height 11 mm; Active surface 3660 mm²; Diameter 150.00 mm The easily attachable tool head with a diameter of 150 mm and a diamond segment height of 11 mm achieves the best results for hard substrates. Thanks to the use of high-quality materials and the segment height, the tool head has a long service life.
Festool instrumenta galviņa DIA HARD-RG 80
  • -20%
Quick view

Festool Machine/tool head DIA HARD-RG 80

Regular price €286.86 -20% Price €229.49
Technical data Segment height 6 mm; Active surface 1385 mm²; Diameter 80.00 mm The easily attachable tool head with a diamond segment height of 11 mm achieves the best results for a hard substrate such as old concrete. Thanks to the use of high-quality materials and the segment height, the replacement disc has a very long service life.
FESTOOL Komplektas kiaurymėms gręžti LR 32 Set
  • -10%
Quick view

Festool Hole drilling set LR 32 Set

Regular price €291.57 -10% Price €262.41
Hole series are always drilled with a spacing of 32 mm and a hole diameter of 5 mm or 3 mm. The hole series drilling system is a set for fast and simple production of series of holes for shelf supports, rear wall supports and fittings with the OF 1010 or OF 1400 router.
Festool spec. savienojums AD-3/8" FF
  • -10%
Quick view

Festool Adapter AD-3/8" FF

Regular price €76.24 -10% Price €68.62
Technical data Holder FastFix The 3/8" socket adapter can be quickly connected to the FastFix interface of the cordless drill or the drill without tools. The adapter is very well suited to turning in hexagon screws in wood construction.
Festool priekšējais ieliktnis AF 55-DWC
  • -10%
Quick view

Festool Magazine attachment AF 55-DWC

Regular price €200.09 -10% Price €180.08
Collated screws from 25 to 55 mm in length can be processed with the magazine attachment for the screwdriver or drywall screwdriver. The screwdriving depth can be easily adapted via the thumbwheel, avoiding reworking and allowing exact screw fittings with a huge cycle speed.
Festool instrumenta galviņa SZ-RG 150
  • -10%
Quick view

Festool Machine/tool head SZ-RG 150

Regular price €515.36 -10% Price €463.82
Technical data Diameter 150.00 mm The SZ-RG 150 tool head with 35 carbide-tipped milling heads for the RG 150. The substrate is roughed up due to the pointed shape, and the material to be detached is quickly and easily removed.
Festool leņķa lineāls GC 1000-WA
  • -10%
Quick view

Festool Angle stop GC 1000-WA

Regular price €402.98 -10% Price €362.68
The angle stop in conjunction with the GC 1000 carpentry guide rail and the practical gauge marker makes working with the carpentry portable circular saw easier. The angle indicator increases precision and efficiency in sawing and routing work. Angles up to 90° can be set on both sides via the scale on the angle stop. Due to the 1000-mm-long...
Festool instrumenta galviņa SZ-RG 80
  • -10%
Quick view

Festool Machine/tool head SZ-RG 80

Regular price €194.06 -10% Price €174.65
Technical data Diameter 80.00 mm The SZ-RG 80 tool head with twelve carbide-tipped milling heads for the RG 80. The substrate is roughed up due to the pointed shape, and the material to be detached is quickly and easily removed.
Festool ieliktnis tūbiņām TZE-KT SYS3 M
  • -10%
Quick view

Festool Cartridge inlay TZE-KT SYS3 M

Regular price €27.13 -10% Price €24.42
All cartridges are safely transported with this insert in conjunction with a Systainer³ 337/437. The nozzle attachments also have a fixed place.
Festool systainer³ organizators SYS3 ORG M 89 22xESB
Quick view

Festool Systainer³ Organizer SYS3 ORG M 89 22xESB

Price €89.41
Technical data Dimensions with adjustable legs (L x W x H) 396 x 296.00 x 89.00 mm; Inner dimensions (L x W x H) 389 x 246 x 60 mm; Volume 7.40 l; Load capacity 20.00 kg; Permitted lid load 100.00 kg; Product weight 2.20 kg The new Systainer³ generation enables you to be more mobile than ever before. Festool, TANOS and bott have collaboratively...
Festool systainer³ SYS3 L 187
Quick view

Festool Systainer³ SYS3 L 187

Price €99.15
Technical data Dimensions with adjustable legs (L x W x H) 508 x 296.00 x 187.00 mm; Inner dimensions (L x W x H) 501 x 275 x 144 mm; Volume 20.20 l; Load capacity 20.00 kg; Load capacity (connected) 40.00 kg; Permitted lid load 100.00 kg; Product weight 2.10 kg The new Systainer³ generation enables you to be more mobile than ever before....
Back to top